Chapter 11 Datalog Function
11.6 Event Save
Event Save refers to monitoring the device value collected, and saving the present data when a certain event condition is
satisfied. This method is useful for analyzing fluctuation of event values and timing by saving data from the event
occurrence to the event termination. Event Save refers to saving data when the event occurs, until the conditions are not
satisfied.
Time
Data
Save condition
occurrence
When a comparison condition occurs,
the data is saved
Event
Event data value
Recovery
Save condition
occurrence
Event
Event data value
Recovery
Note
After selecting Trigger Save, if the first trigger condition occurs and another trigger condition occurs while
collecting data, the new trigger is ignored.
To Next Page
Loading...
