Chapter 14 Local Ethernet Function
14.2.5 Firewall Setting
When you access to the FTP server through Windows command prompts, FTP access may not be smooth since the
FTP access is applied. When you have bad access, cancel a firewall or apply exception handling.
If the FTP access is not smooth, refer to the below.
(1) Cancellation of a firewall
Clear the window’s own firewall.
(a) Execute the control panel.
(b) Execute the Windows Firewall.
(c) Execute setup or clear of the Windows Firewall.
(d) Clear all firewalls as below.
Note
If you clear the Windows Firewall, you may be exposed to various external intrusions so you are
recommended to register the exceptional rules to a firewall.
To Next Page
Loading...
