LSIS XGT Series - Page 808

Chapter 14 Local Ethernet Function
14-20
Note
1. You need to distinguish ASCII from Binary command depending on the file extension. If you transmit the
file with a wrong mode, the file will not work properly.
(a) File extension names using ASCII: html, htm, txt, cgi, pl, php, phtml, php3, sql, c, ph, py, etc.
(b) File extension names using Binary: gif, jpg, swf, png, exe, asf, wmv, zip, rar, gzip, tar, gz, etc.
2. If you download the network setting parameters when accessing to the FTP server, the current
download will stop and serious errors may occur in the relevant file so you cannot open it in the PC.
Accordingly, if possible, you are recommended to disconnect the FTP server when downloading the
network setting parameters.
(4) FTP response code list
Response codes
Description
150
File status okay; about to open data connection
200 Command okay
202
Command not implemented, superfluous at this site
211
Type: ASCII, Structure: FILE, Mode: Stream
215
UNIX Type: L8 Version: Nucleus-ftpd
220
Nucleus FTP Server (Version 1.7) ready
221
Service closing control connection. Logged out if appropriate.
226
Closing data connection. Requested file action successful.
230
User logged in, proceed
250
Requested file action okay, completed.
331
User name okay, need password
500
Syntax error, command unrecognized.
502
Command not implemented. The server does not support this command.