LSIS XGT Series - Page 399

Chapter 8 Motion Control Function
8-8
Value
Description
28
(12) The Home position is determined as in (12) method, but index pulse is not used. In addition, the point where
the Home switch is On/Off becomes the Home position.
33, 34
The location that meets index pulse first during movement in the reverse direction CCW/forward direction CW
becomes the Home position.
35
Homing operation starting point becomes the Home position.
Note) ▬ : Speed during search for switch (0x6099:01), → : Speed during search for zero (0x6099:02)