LSIS XGT Series - Page 635

Chapter 11 Datalog Function
11-15
(3) Event Save
Event Save runs with similar conditions to Trigger Save. Event Save refers to saving data when the event occurs,
until the conditions are not satisfied.
Trigger
Occurrence
Condition
Device
Set Condition
Operation
Release
Value
Setting
Bit
Condition
Elevation
Saves data at elevation edge of set device bit value
Descent
Saves data at descent edge of set device bit value
Transfer
Saves data when set device bit value is transferred
or
ON
Saves data when set device bit value is ON
OFF
Saves data when set device bit value is OFF