LSIS XGT Series - Page 672

Chapter 11 Datalog Function
11-52
(c) Select [Trigger Logging] at [Data Collection Method] to activate [Setting] menu on the left.
Then, select the [Setting] menu on the left.
(d) Upon selection, the following window is activated for trigger setting.
Select [Single Condition] as the Trigger Condition. Select either [Elevation] or [Descent] as the Trigger
Occurrence Condition.
(e) Select the condition setting menu to activate the following setting window.
Select [BIT Condition], and input device values into the device window in BIT types.