Chapter 11 Datalog Function
(d) Upon selection, the following window is activated for trigger setting.
Select [Multiple Condition] as Trigger Condition, Select either [Elevation] or [Descent] as the Trigger Occurrence
Condition.
(e) Select [Trigger Condition] and [Multiple Condition] to activate the condition setting window which allows for up to
4 inputs.
(f) Select each condition setting menu one by one, inputting specific set values.
[Multiple Condition] activates Trigger Condition by combining [Single Conditions] through operation to save data.
As described below, the basic setting method is the same as that of Single Condition.
To Next Page
Loading...
