Chapter 11 Datalog Function
(h) Device values set at the Datalog Basic Setting window are collected when the Trigger Condition occurs,
converted into the set type, and saved into the SD memory.ion.
(4) Multiple OR Condition
[Trigger Setting] is identical to the [Multiple AND Calculation] above.
(a) Select each condition setting menu one by one, inputting specific set values.
[Multiple Condition] activates Trigger Condition by combining [Single Conditions] through operation to save data.
As described below, the basic setting method is the same as that of Single Condition.
When setting is complete, the window closes and the conditions initially set at the Trigger Setting Condition menu
are displayed as follows.
To Next Page
Loading...
