LSIS XGT Series User Manual

Chapter 3 Operation Order and Installation
3-32
(2) Troubleshooting flowchart used with when the ERR (Error) LED is flickering
The following flowchart explains corrective action procedure used when the power is supplied starts or
the ERR LED is flickering during operation.The following flowchart explains corrective action procedure used
when the power is supplied or the power LED turns
Note
Though warning error appears, motion controller system doesn’t stop but corrective action is needed
promptly. If not, it may cause the system failure.
STOP LED goes flickering
No
No
Yes
Check the error code, with
connected XG5000.
Write down the Troubleshooting
Questionnaires and contact the nearest
service center.
See Appendix 1 Flag list and
remove the cause of the
error.
Complet
e
Yes
Warning error?
Is ERR LED still flicking?

LSIS XGT Series Specifications

General

Brand	LSIS
Model	XGT Series
Category	Controller
Language	English