LSIS XGT Series - Page 776

Chapter 13 Built-in Analog Function
13-40
(3) Channel error information
(a) This area shows the channel error status.
(b) _01_AD0_ERR(%UX0.1.32) : Input channel 0 error
_01_AD1_ERR(%UX0.1.33) : Input channel 1 error
_01_DA0_ERR(%UX0.1.40) : Output channel 0 error
_01_DA1_ERR(%UX0.1.41) : Output channel 1 error
%UW0.1.2
Channel error information
Bit On (1) : Error
Bit Off (0) : Normal
Channel error information
Bit On (1) : Error
Bit Off (0) : Normal
- -
Input channel 0 Input channel 1
------ - ---
Output channel 0 Output channel 1
- -
Bit15 Bit4 Bit13
Bit12 Bit11 Bit10 Bit9 Bit8 Bit7 Bit6
Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
(4) Input alarm (upper/lower) flag
(a) This area shows upper/lower alarm per channel status.
(b) _01_AD0_HOOR(%UX0.1.48) : Input channel 0 upper alarm
_01_AD1_HOOR(%UX0.1.49) : Input channel 1 upper alarm
_01_AD0_LOOR(%UX0.1.56) : Input channel 0 lower alarm
_01_AD1_LOOR(%UX0.1.57) : Input channel 1 lower alarm
%UW0.1.3
- -
Input channel 0 Input channel 1
--
--
-- -
---
Input channel 0 Input channel 1
- -
Bit15 Bit4 Bit13 Bit12 Bit11 Bit10 Bit9 Bit8 Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
Upper alarm detection
Bit On(1) : Upper alarm status
Bit Off(0) : Normal
Lower alarm detection
Bit On(1) : Lower alarm status
Bit Off(0) : Normal