LSIS XGT Series - Page 778

Chapter 13 Built-in Analog Function
13-42
(c) _01_DA0_DATA(%UW0.1.8) : Output channel 0 input data
_01_DA1_DATA(%UW0.1.9) : Output channel 1 input data
Output channel 0 digital data
%UW0.1.8
Output channel 1 digital data
%UW0.1.9
Bit15 Bit4 Bit13
Bit12 Bit11 Bit10 Bit9 Bit8 Bit7 Bit6 Bit5 Bit4
Bit3 Bit2 Bit1 Bit0
(9) Operating channel setting.
(a) If the operating channel is not set, overall channel status is STOP.
(b) _01_AD0_RUN(%UX0.1.160) : Input channel 0 operating setting
_01_AD1_RUN(%UX0.1.161) : Input channel 1 operating setting
_01_DA0_RUN(%UX0.1.168) : Output channel 0 operating setting
_01_DA1_RUN(%UX0.1.169) : Output channel 1 operating setting
%UW0.1.10
Input channel setting
Bit On (1) : Operation
Bit Off (0) : Stop
Output channel setting
Bit On (1) : Operation
Bit Off (0) : Stop
- -
Input channel 0 Input channel 1
------ - ---
Output channel 0 Output channel 1
- -
Bit15 Bit4 Bit13 Bit12 Bit11 Bit10 Bit9 Bit8 Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
(10) Input range setting
(a) The ranges of analog input voltage are DC 1~5V, DC 0~5V, DC 0~10V, DC -10~10V, the ranges of analog
current input are DC 4~20mA, DC 0~20mA.
(b) _01_AD0_RANGE(%UB0.1.22) : Input channel 0 range setting.
_01_AD1_RANGE(%UB0.1.23) : Input channel 1 range setting.
Don't Care
%UW0.1.11
Input range setting (4 Bit per channel)
0 : 4~20㎃
1 : 0~20㎃
2 : 1~5V
3 : 0~5V
4 : 0~10V
5 : -10~10V
Don't Care Input channel 1 Input channel 0
Bit15 Bit4 Bit13 Bit12
Bit11 Bit10
Bit9 Bit8 Bit7 Bit6 Bit5 Bit4 Bit3
Bit2 Bit1
Bit0