LSIS XGT Series - Page 815

Chapter 14 Local Ethernet Function
14-27
Procedures Description
2
Write
parameters
and Link
Enable
Select [Online] → [Write] in XG5000’s project window.
3 If you click the [OK] button, ‘Write Parameters’ will be done.
Note
1. When parameter setting is done, the PLC reads periodically the time value from the SNTP server.
2.The SNTP server IP address is initially set as follows.
IP
Port
211.233.84.186 123
211.233.40.78 123
178.63.135.195 123
104.131.51.97 123