MacDon D1 Series - Page 172

215184 148 Revision A
1017273
Figure 4.9: Header on Flat Deck
7. Load header onto trailer. Place wooden blocks under
cutterbar and float module frame as required to stabilize
header.
8. Back up slowly and move forklift away from flat deck.
1008357
A
Figure 4.10: Header on Flat Deck
9. Secure with hauler’s tie-down straps and chains.
IMPORTANT:
Route tie-down straps (A) under the reel tube to avoid
severely damaging reel tube. Ensure strap clears reel
tine tubes.
LOADING HEADER FOR TRANSPORT TO DEALERSHIP