215184 392 Revision A
Figure 9.198: Learning Reel Height Page
5. Follow the prompts that appear in Description and Notes
fields (A).
Figure 9.199: Operator Controls
6. When prompted, select OK button (A) to start the learning
procedure.
9.1.12 Gleaner R65/R66/R75/R76 and S Series Combines
Checking Voltage Range from the Combine Cab – Gleaner R65/R66/R75/R76 and Pre-2016 S Series
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the combine
operator’s manual for updates.
1. Position the header 150 mm (6 in.) above the ground, and unlock the float.
SETTING UP AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
