MacDon D1 Series - Installing Crop Divider with Latch Option

215184 252 Revision A
Installing Crop Divider with Latch Option
C
D
B
A
1002942
Figure 7.110: Crop Divider with Latch
1. Position the crop divider as shown by inserting lugs (A) into
holes in the endsheet.
2. Lift the forward end of the divider until pin (B) engages and
closes latch (C).
3. Push safety lever (D) down to lock the pin in latch.
1014413
A
Figure 7.111: Crop Divider Adjustment
4. Adjust bolts (A) to tighten divider and remove lateral play
when pulling at divider tip.
ATTACHING HEADER TO COMBINE