MacDon D1 Series - Adjusting Auto Reel Speed - CLAAS 8000;7000 Series

215184 389 Revision A
1031500
A
Figure 9.190: CEBIS Main Page
1. From the main page, select FRONT ATTACHMENT (A).
1031569
A
Figure 9.191: Front Attachment Parameters Page
2. From the drop down list, select FRONT ATTACHMENT
PARAMETERS (A).
1031568
A
B
C
Figure 9.192: Drop Rate with Auto Contour Page
3. Scroll through the list and select DROP RATE WITH AUTO
CONTOUR icon (A).
4. Adjust the drop rate by sliding adjuster arrow (B) up
or down.
5. Select check mark (C) to confirm settings.
Adjusting Auto Reel Speed – CLAAS 8000/7000 Series
WARNING
Clear the area of other persons, pets etc. Keep children away from machinery. Walk around the machine to be sure no
one is under, on, or close to it.
SETTING UP AUTO HEADER HEIGHT CONTROL