MacDon D1 Series - Page 388

215184 364 Revision A
1003730
A
Figure 9.132: Challenger Combine Display
2. Press HEADER CONTROL (A). The HEADER CONTROL screen
displays.
1003731
Figure 9.133: Challenger Combine Display
3. Go to the TABLE SETTINGS tab.
4. Press up arrow on MAX UP PWM to increase percentage
number and increase raise speed. Press down arrow on
MAX UP PWM to decrease percentage number and
decrease raise speed.
5. Press up arrow on MAX DOWN PWM to increase
percentage number and increase lower speed. Press down
arrow on MAX DOWN PWM to decrease percentage
number and decrease lower speed.
SETTING UP AUTO HEADER HEIGHT CONTROL