MacDon D1 Series - Page 487

215184 463 Revision A
1015833
A
B
Figure 9.353: Float Indicator Box
3. Adjust cable take-up bracket (B) (if necessary) until float
indicator pointer (A) is on 0.
1003672
A
Figure 9.354: New Holland Combine Display
4. Ensure header float is unlocked.
5. Select DIAGNOSTICS (A) on the main screen. The
DIAGNOSTICS screen displays.
6. Select SETTINGS. The SETTINGS screen displays.
1003673
A
Figure 9.355: New Holland Combine Display
7. Select GROUP drop-down arrow (A). The GROUP dialog box
displays.
SETTING UP AUTO HEADER HEIGHT CONTROL