MacDon D1 Series - Page 501

215184 477 Revision A
1024375
A
Figure 9.380: New Holland Combine Display
7. Set HEADER SUB TYPE to 80/90 (A) for a New Holland
combine.
1016057
A
Figure 9.381: New Holland Combine Display
8. Select HEAD 2 (A). The HEADER SETUP 2 screen displays.
1016062
A
B
C
D
Figure 9.382: New Holland Combine Display
9. Select the AUTOFLOAT drop-down arrow and set
AUTOFLOAT to INSTALLED (A).
10. Select the AUTO HEADER LIFT drop-down arrow and set
AUTO HEADER LIFT to INSTALLED (B).
NOTE:
With AUTO HEADER LIFT installed and AHHC engaged, the
header will lift up automatically when you pull back on the
control handle.
11. Set the values for MANUAL HHC RAISE RATE (C) and
MANUAL HHC LOWER RATE (D) for best performance
according to ground conditions.
SETTING UP AUTO HEADER HEIGHT CONTROL