OM SYSTEM OM-1 Mark II User Manual

Role Function
MF(J)
(AF/MF toggle)
Switch between AF and MF. Press once to select MF and again to return to
the previous mode. The focus mode can also be selected by holding the
button and rotating a dial.
RAWX (RAW image
quality)
(K only)
If you press the button when [KX] is set to JPEG, it changes to
RAW+JPEG. If it is set to RAW or RAW+JPEG, the setting does not change.
You can also choose an image quality setting by holding the button and
rotating a dial.
Test Picture (KTest)
(K only)
Take a test shot. You can view the effects of selected settings in an actual
photograph. If you keep the control pressed while pressing the shutter
button, you will be able to view the results but the picture will not be
saved to the memory card.
Custom Mode C1–C4
(C1–C4)
(K only)
Recall settings for the selected custom mode. Press the control once to
recall saved settings, a second time to restore the settings previously
in effect (P.75). The control continues to perform this function when a
custom mode is selected with the mode dial.
Exposure Comp. (F)
Adjust exposure settings. Hold the control and rotate the front or rear dial.
Alternatively, you can press the button to activate settings and then rotate
the dials. The adjustments available vary with the shooting mode:
[P]: Use the front or rear dial or HI for exposure compensation. Use the
FG buttons for program shift.
[A]: Use the front or rear dial or HI for exposure compensation. Use the
FG buttons for aperture.
[S]: Use the front or rear dial or HI for exposure compensation. Use the
FG buttons for shutter speed.
[M]: Use the rear dial or FG for shutter speed. Use the front dial or the
HI buttons for aperture.
For information on adjusting exposure settings when [Auto] is selected
for [ISO] (P.166), see “Adjusting Exposure Compensation” (P.153).
[B]: Use rear dial or FG to switch between bulb/time and live composite
photography. Use the front dial or the HI buttons for aperture.
337
Changing the roles of buttons (Button Settings)
B

OM SYSTEM OM-1 Mark II Specifications

General

Camera Type	Mirrorless
Sensor Resolution	20.4MP
Image Processor	TruePic X
Connectivity	Wi-Fi, Bluetooth, USB-C, HDMI
Body Construction	Magnesium Alloy
Dimensions	134.8 x 91.6 x 72.7 mm
Sensor Size	Four Thirds
ISO Range	ISO 200-102400 (expandable to ISO 80-102400)
Image Stabilization	5-axis in-body
Autofocus System	1053-Point Hybrid Autofocus
Viewfinder Type	Electronic (EVF)
Viewfinder Resolution	5.76 million dots
Viewfinder Magnification	1.65x (35mm equivalent)
Rear Screen	3.0" vari-angle touchscreen
Rear Screen Resolution	1.62 million dots
Video Recording	4K UHD at 60p/50p/30p/25p/24p
Video Format	MOV
Audio Recording	Stereo, external mic input
Storage Media	Dual SD Card Slots (UHS-II)
Battery	BLX-1 Lithium-Ion Battery
Weight	599 g (with battery and memory card)
Battery Life	Approx. 520 shots (CIPA standard)
Shutter Speed	1/8000 to 60 sec
Weather Sealing	Yes (IP53 rated)