Role Function
Live GND Shooting
(GND)
(K only)
Enable the live GND filter (P.246). Press once to enable [Live GND
Shooting] and adjust filter position and boundary settings. Press the
control again to display shooting information and access other settings.
Hold the button and rotate the front or rear dial to adjust [Filter Type]
and [GND Number]. Press and hold the control to select [Off] for [Live
GND Shooting].
Off The control is not used.
Flash Mode (A)
(K only)
Adjust flash settings (P.179). Press once to display flash options and again
select the highlighted option and exit. Highlight settings using the front or
rear dial or HI.
This function can be assigned to the I and G buttons only. You must
first set [d] to [Direct Function].
g/Y
(sequential shooting/
self-timer)
(K only)
Choose a drive (sequential shooting/self-timer) mode (P.190). Press the
button to display drive mode options and then choose a mode using the
front or rear dial or the HI buttons.
This function can be assigned to the I and G buttons only. You must
first set [d] to [Direct Function].
7Lock
(touch control lock)
Lock touch controls. Press and hold the button once to lock touch controls
and again to unlock.
This function can be assigned to the I and G buttons only. You must
first set [d] to [Direct Function].
Electronic Zoom
(X)
Zoom power zoom lenses in or out. After pressing the control, use the
arrow pad to zoom in or out. Use F or I to zoom in and G or H to
zoom out.
This function can be assigned to the I and G buttons only. You must
first set [d] to [Direct Function].
AF Stop (AF Stop)
Suspend autofocus. Focus locks and autofocus is suspended while the
control is pressed. Applies only to the lens j button.
340
Changing the roles of buttons (Button Settings)
C
C
C
C
To Next Page
Loading...
