Role Function
qLevel Disp
(U)
Display the digital level gauge. The exposure bar display in the viewfinder
functions as a level gauge. Press the control again to exit. This option
takes effect when [qStyle 1] or [qStyle 2] is selected for [EVF Style]
(P.368).
UView Selection
(U)
(display selection)
Switch between viewfinder photography and live view. If [Off] is selected
for [EVF Auto Switch] (P.402), the display will switch between the
viewfinder and the monitor. Press and hold the control to display [EVF
Auto Switch] options.
LV Mode (S-OVF)
(K only)
Switches [KLV Mode] (P.362) between [Standard] and [S-OVF].
AF Limiter (AFLimit)
(K only)
Enable the [AF Limiter] (P.129). Press once to enable [AF Limiter]. Press
again to disable. Hold the button and rotate the front or rear dial to
choose from three stored settings.
Preset MF (PreJ)
Set [AF Mode] to [PreJ] (P.100) Press the control once to enable preset
MF and again to restore the previous focus mode. Alternatively, you can
choose the [AF Mode] by holding the control and rotating a dial.
Lens Info Settings
(VLens)
Recall previously-saved lens data (P.394). Recall saved data for the current
lens after changing lenses or the like.
IS Mode (IS)
Toggle [Image Stabilizer] on or off (P.204). Press once to select [Off] and
again to turn image stabilization on. Hold the control and rotate the front
or rear dial to access [Image Stabilizer] options.
Flicker Scan (Flicker
Scan)
Adjust settings for [Flicker Scan] (P.157). Press the control to select [On].
You can adjust shutter speed for best results while viewing banding in the
display. Press the control again to display shooting information and access
other settings. Press and hold the control to select [Off] for [Flicker
Scan].
Live ND Shooting
(ND)
(K only)
Enable the live ND filter (P.243). Press once to enable [Live ND Shooting].
Press again to disable. Hold the button and rotate the front or rear dial to
adjust [ND Number] settings.
339
Changing the roles of buttons (Button Settings)