Omron RX2 Series User Manual

5 Monitor
5 - 12
High-function General-purpose Inverter RX2 Series User’s Manual
5-6 Operation Time and Count Monitor
The cumulative operating hours monitor during RUN displays the duration of the time when an inverter
provides output after it receives an operation command.
Precautions for Correct Use
The cumulative operating hours monitor during RUN cannot be cleared by initialization or the
similar method.
 Parameter
The cumulative power-on time monitor displays the duration of the time when the inverter was turned
ON.
Precautions for Correct Use
The cumulative power-on time monitor cannot be cleared by initialization or the like.
 Parameter
The total start-up count monitor displays the number of times when the inverter starts outputs from the
power-off condition.
Precautions for Correct Use
Total start-up count monitor cannot be cleared by initialization or the like.
 Parameter
5-6-1 Cumulative operating hours monitor during RUN
Item Parameter Data Description
Cumulative operat-
ing hours monitor
during RUN
[dC-22] 0 to 100000 [hr]
Stores and displays the duration of the time
when an inverter provides output.
5-6-2 Cumulative Power-on Time Monitor
Item Parameter Data Description
Cumulative
power-on time
monitor
[dC-24] 0 to 100000 [hr]
Data of period that the inverter is ON is
stored for monitoring.
5-6-3 Total Start-up Count Monitor
Item Parameter Data Description
Total start-up count
monitor
[dC-20] 0 to 65535 (Counts)
Checks the number of times the inverter
entered an operation condition from an
power-off condition.

Omron RX2 Series Specifications

General

Brand	Omron
Model	RX2 Series
Category	Inverter
Language	English