Manual Configuration
2
High-function General-purpose Inverter RX2 Series User’s Manual
Manual Configuration
This user’s manual consists of the following sections.
Read the necessary sections with a reference of the following table.
Section/Title Outline
Section 1 Overview
This section provides the features of this product, spec-
ifications, external dimensions, and part names.
Section 2 Design
This section describes the installation and wiring meth-
ods for this product.
Section 3 Operation
This section describes the followings:
• Operation methods
• Parts name in digital operator for test run
• Its key operation
Section 4 Test Run This section describes how to perform a test run.
Section 5 Monitor
This section describes various monitoring functions
built-in an inverter.
Section 6 Basic Parameter Settings
This section describes settings of connections to each
destination of frequency commands and operation
commands.
Section 7 Advanced Settings
This section describes various functions built-in an
inverter.
Section 8 Applied Settings
This section describes functions other than Section.6
and 7.
Section 9 Communications Functions
This section describes the general-purpose serial com-
munications functions (RS-485 communication).
Section 10 DriveProgramming
This section describes the features of the DrivePro-
gramming.
Section 11 Options
This section describes the specifications and external
dimension of peripheral equipment.
Section 12 Troubleshooting
This section describes how to analyze the cause and
take countermeasures if the inverter fails, and provides
troubleshooting for possible troubles.
Section 13 Maintenance and Inspection
This section describes the maintenance and periodical
inspection items.
Appendices
This section describes the technical information and
parameters.
To Next Page
Loading...
Need help?
General