Omron RX2 Series - Data Copy Function; Read Function

3 - 27
3 Operation
High-function General-purpose Inverter RX2 Series User’s Manual
3-5 Data Copy Function
3
3-5-1 Read Function
3-5 Data Copy Function
With R/W function, you can copy the data at Inverter and transfer to LCD operator or write the copied
data to the inverter.
In case you rewrite a backup data to the inverter or to copy data at other inverters, this function is avail-
able.
Only a set of data can be saved.
Copy the data at Inverter and transfer to LCD operator.
On the screen that is displayed upon power-on, press the F1 (1) key to navigate to the menu screen
“M01”. Then, select the R/W function by pressing the Enter key.
3-5-1 Read Function
Set-up procedure Action
Press the Enter key to confirm the READ function.
Select data to be read by using the up and down (
) keys. Then, confirm the function by pressing the
Enter key.
Main monitor screen
Menu screen (M01)
F1 (1) key
* Select 02 R/W function by +
Enter key.
Transfer to R/W function screen (R01)
and follow the procedure below.
Home
----
46.49Hz
oFW
M1
M01
Menu
01 Scroll mode
02 R/W function
03 System setting
STOP
R/W Function
01 READ
02 WRITE
R/W Function>Type of Read Data
01 Parameter Data
02 Parameter Data + EzSQ