1.
Navigate to MANAGEMENT> NETWORK: NTP Setup.
2.
In the NTP Actions panel, click View NTP Clients:
3.
The NTP Clients window will display, showing a table of the clients that are syn-
chronizing to SecureSync via NTP:
You can search any of the fields for specific information in the Search field at
the top of the window.
A limit of 10 entries will appear on the screen at any one time. If you have
more than 10clients, you can move through the table using the First, Pre-
vious, Next and Last navigation buttons at the bottom of the screen.
2.15.5 Restoring the Default NTP Configuration
The SecureSync default NTP configuration can be restored at any time. It comprises basic
settings such as Stratum1 operation with no other servers or peers, no broadcasting and
no access restrictions. External queries or modifications are not permitted, while generally
all IPv4 and IPv6 client connections are allowed.
To restore SecureSync to its default NTP configuration:
100
CHAPTER 2 • SecureSync 2400 User Manual Rev. 2
2.15 Configure NTP
To Next Page
Loading...
Need help?
General
