click Submit.
4.3.2.2 The Administrator Password
The factory default administrator login password value of
admin123
can be changed from
the default value to any desired value. If the current password is known, it can be changed
using the SecureSync WebUI.
Note: To follow this procedure, you must be logged in as the spadmin user.
If you are unable to login as spadmin, follow the procedure outlined in "Lost
Password" on the facing page.
If the password has already been changed from the default value, but the current value is
no longer known, the administrator password can be reset back to the factory default
value, see "Lost Password" on the facing page. Once reset, it can then be changed to a
new desired value via the WebUI.
Changing the admin password
To change the admin password from a known value to another desired value:
1.
Navigate to MANAGEMENT > OTHER: Change My Password.
2.
The Change Password window will display.
256
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
4.3 Managing Users and Security
To Next Page
Loading...
Need help?
General
