Orolia SecureSync 2400 User Manual

You can create a unique X.509 self-signed Certificate, an RSA private key and X.509 cer-
tificate request using the WebUI. RSA private keys are supported because they are the
most widely accepted. At this time, DSA keys are not supported.
2.14.6.4 Creating an HTTPS Certificate Request
Caution: If you plan on entering multiple Subject Alternative Names to your
HTTPS Certificate Request, you must do so before filling out the Create
Certificate Request tab to avoid losing any information. See "Adding
HTTPS Subject Alternative Names" on page71.
To create an HTTPS Certificate Request:
1.
Navigate to MANAGEMENT > NETWORK: HTTPS Setup, or in the MANAGEMENT
> NETWORK Setup, Actions panel, select HTTPS:
2.
Click the Create Certificate Request tab (this is the default tab).
3.
Check the box Create Self Signed Certificate, in order to open up all menu items.
This checkbox serves as a security feature: Check the box only if you are certain
about generating a new self-signed Certificate.
Caution: Once you click Submit, a previously generated Certificate
(or the Spectracom default Certificate) will be overwritten.
Note that an invalid Certificate may result in denial of access to SecureSync via the
Web UI!
68
CHAPTER 2 • SecureSync 2400 User Manual Rev. 2
2.14 Configure Network Settings

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English