access.
4.4.2.1 To change the time display on the front panel:
1. Log on to the Web UI
2. Navigate to MANAGEMENT > Front Panel.
3. Select your general region, and the specific time zone. The listed time regions and zones
are based on the zones found here.
4. Click Submit
Changing this time display does not affect any internal clocks or create a local clock within
the system.
4.4.2.2 To lock or unlock the front panel:
1. Log on to the Web UI
2. Navigate to MANAGEMENT > Front Panel.
3. Check the box next to Lock Front Panel to lock. To unlock, verify that the box is
unchecked.
4. Click Submit
The front panel information display will lock at the last viewed screen. A small padlock icon
will appear in the upper right hand corner of the display, and will flash brighter if any but-
tons are pressed on the front panel.
Figure 4-2: Locked Front Panel Display
The front panel will remain locked until it is unlocked through the Web UI. The Web UIis
the only means of locking and unlocking the front panel information display.
4.4.3 Creating a Login Banner
A login banner is a customizable banner message displayed on the login page of the
SecureSync Web UI. The login banner can be used, for example, to identify a unit.
4.4 Miscellanous Typical Configuration Tasks
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
275
To Next Page
Loading...
Need help?
General
