Orolia SecureSync 2400 User Manual

Alarm output
Special functionality e.g., revertive selector, bidirectional communication
Connector type:
BNC
DB-9/25
Terminal block
RJ-12/45
SFP
ST fiber optic
To visually identify an option card installed in your unit, or to obtain an overview which
option cards are available for SecureSync, see "Option Cards Overview" below.
To obtain detailed information on a specific option card, using its ID number, see "Option
Card Identification" on page18.
To locate option card topics in this manual by their heading or functionality, see "Option
Cards" on page333. This Chapter also includes information on field installation and Web
UI functionality.
To visually identify a connector type, see "Option Card Connectors" on page21.
1.5.1 Option Cards Overview
The table below lists all SecureSync option cards available at the time of publication of this
document, sorted by their function.
The table column (see table below) WebUI Name refers to the names under which the
cards installed in a SecureSync unit are listed in the INTERFACES > OPTION CARDS
drop-down menu.
Detailed specifications and configuration assistance for every card can be found in the
APPENDIX. To quickly access the APPENDIX topic for your option card(s), you may use
the hyperlinks in table "Option cards listed by their ID number" on page19.
Note: * Every option card has a unique 2-digit ID number located on its
cover plate, and in the center column of the table below. The complete Oro-
lia Part Number for option cards is 1204-xx (e.g., 1204-18).
1.5 Option Cards
CHAPTER 1 • SecureSync 2400 User Manual Rev. 2
15

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English