Caution: Electronic equipment is sensitive to Electrostatic Discharge
(ESD). Observe all ESD precautions and safeguards when handling Orolia
equipment.
SAFETY: User Responsibilities
The equipment must only be used in technically perfect condition. Check com-
ponents for damage prior to installation. Also check for loose or scorched cables on
other nearby equipment.
Make sure you possess the professional skills, and have received the training neces-
sary for the type of work you are about to perform.
Do not modify the equipment.
Use only spare parts authorized by Orolia.
Always follow the instructions set out in this User Manual, or in other Orolia doc-
umentation for this product.
Observe generally applicable legal and other local mandatory regulations.
SAFETY: Other Tips
Keep these instructions at hand, near the place of use.
Keep your workplace tidy.
Apply technical common sense: If you suspect that it is unsafe to use the product, do
the following:
Disconnect the supply voltage from the unit.
Clearly mark the equipment to prevent its further operation.
2.5 Mounting the Unit
SecureSync units can be operated on a desktop or in a rack in a horizontal, right-side-up
position. The location needs to be well-ventilated, clean and accessible.
Caution: For safety reasons the SecureSync unit is intended to be operated
in a HORIZONTAL POSITION, RIGHT-SIDE-UP.
2.5 Mounting the Unit
CHAPTER 2 • SecureSync 2400 User Manual Rev. 2
41
To Next Page
Loading...
Need help?
General
