6.
The established rule appears in the Network Access Rules window.
Click the Delete button next to an existing rule, if you want to delete it.
2.14.6 HTTPS
HTTPS stands for HyperText Transfer Protocol over SSL (Secure Socket Layer). This
TCP/IP protocol is used to transfer and display data securely by adding an encryption layer
to protect the integrity and privacy of data traffic. Certificates issued by trusted authorities
are used for sender/recipient authentication.
Note: In order to configure HTTPS, you need ADMINISTRATORrights.
2.14.6.1 Accessing the HTTPS Setup Window
1.
Navigate to MANAGEMENT > NETWORK: HTTPS Setup (or, navigate to
MANAGEMENT > Network Setup, and click HTTPS in the Actions panel on the left):
2.14 Configure Network Settings
CHAPTER 2 • SecureSync 2400 User Manual Rev. 2
65
To Next Page
Loading...
Need help?
General
