3.
Click the ON/OFF toggle under Enable RADIUS to enable or disable the feature.
4.
If you are enabling the service, in the Retransmit Attempts field, select the num-
ber of retries for SecureSync to communicate with the RADIUS server (default = 0).
5.
Click Submit.
4.3.5.2 Adding/Removing a RADIUS Server
To add a RADIUSauthentication server, or remove a server from the list:
1.
Navigate to MANAGEMENT > OTHER: Authentication.
2.
In the Actions panel on the left, click RADIUS Setup. The RADIUS Setup window
will be displayed:
268
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
4.3 Managing Users and Security