Orolia SecureSync 2400 User Manual

5.2.1.3 Configuring Option Card Inputs/Outputs
The configurable settings of any SecureSync input or output interface are accessible
through the Edit window of the option card to which the input or output belongs. The Edit
window can be accessed in several ways; the procedure below describes the standard way:
1.
Identify the name of the card, (e.g., PPSOUT, 4-BNC), and verify the name of the
input or output you want to configure (e.g., PPS Output 1).
Note: If you have only one input or output of any type, SecureSync
will number that input or output 0. Additional inputs or outputs will
be numbered 1 or above.
2.
Navigate to the INTERFACES > OPTION CARDS drop-down menu, and click the
list entry of the option card identified above. The option card’s Status Summary
panel opens:
3.
Click on the GEAR button next to the input or output you wish to configure (as veri-
fied in Step1 of this procedure). The Edit window of the input or output opens:
336 SecureSync 2400 User Manual
APPENDIX

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English