4.
Click Submit.
2.20.4 Configure an ASCII Output
An ASCII Output is available by default and configuration through the Multi-I/O connector
(see "Configurable Connectors" on page136).
To configure the ASCII Output, go to its Edit window.
The Output Edit window allows the configuration of the following settings:
Format Group – configures the message format type. Choices are:
None (no message will be output)
Spectracom
NMEA
BBC
ICD-153
EndRun
2.20 Configuring Outputs
CHAPTER 2 • SecureSync 2400 User Manual Rev. 2
151
To Next Page
Loading...
