Orolia SecureSync 2400 User Manual

The time difference from UTC, ±HHMM, is selected when the Serial Com or Remote port
is configured. A time difference of -0500 represents Eastern Time. UTC is represented by
+0000.
The Daylight Saving Time indicator (D) is defined as:
S During periods of Standard time for the selected DST schedule.
I During the 24-hour period preceding the change into DST.
D During periods of Daylight Saving Time for the selected DST schedule.
O During the 24-hour period preceding the change out of DST.
The leap second indicator (L) is defined as:
(Space) When a leap second correction is not scheduled for the end of the month.
L When a leap second correction is scheduled for the end of the month.
E x a m p l e :
0003 20150415 124536-0500D #
The example data stream provides the following information:
Data Format 3
Sync Status Day 271 of year 2015.
Date April 15, 2015.
Time 12:45:36 EDT (Eastern Daylight Time). The time difference is 5 hours behind UTC.
Leap Second No leap second is scheduled for this month.
5.4.9 Spectracom Format 4
Format 4 provides a format indicator, time synchronization status character, modified
Julian date, time reflecting UTC with 0.1 millisecond resolution and a leap second indicator.
Format 4 data structure is shown below:
E x a m p l e :
FFFFIMJDXX^HHMMSS.SSSS^L CR LF
530 SecureSync 2400 User Manual
APPENDIX

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English