Orolia SecureSync 2400 User Manual

To learn more about setting up different types of user accounts, see "Managing User
Accounts" on page250.
2.14 Configure Network Settings
Before configuring the network settings, you need to setup access to SecureSync web
user interface ("Web UI"). This can be done by assigning a static IP address, or using a
DHCP address. For more information, see "Setting up an IP Address" on page49.
Once you have assigned the IP address, login to the Web UI. For more information, see
"Accessing the WebUI" on page56.
To configure network settings, or monitor your network, navigate to SecureSync's Net-
work Setup screen.
To access the Network Setup screen:
Navigate to MANAGEMENT > Network Setup. The Network Setup screen is
divided into three panels:
The Actions panel provides:
General Settings: Allows quick access to the primary network settings neces-
sary to connect SecureSync to a network. See "General Network Settings"
on the facing page.
Web Interface Settings:
Web interface timeout: Determines how long a user can stay logged
on. For more information, see "Web UI Timeout" on page259.
58
CHAPTER 2 • SecureSync 2400 User Manual Rev. 2
2.14 Configure Network Settings

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English