4.3.3 Web UI Timeout
For security reasons, the WebUI will automatically timeout after a set number of minutes,
i.e. you will be logged out by the system, regardless of activity, and need to actively login
again.
Minimum timeout duration: 10minutes
Maximum timeout duration: 1440 minutes (24hours)
Default timeout duration: 60minutes.
To change the time after which the WebUI will timeout:
1.
Navigate to the MANAGEMENT > Network Setup screen.
2.
In the Actions panel on the left, click on Web Interface Settings.
3.
In the Web Interface Settings window, enter the desired value in minutes.
In order for a new setting to take effect, you need to log off, and then log back in again.
This setting affects all users, not just the user changing the value.
Note: The Web UIdoes not allow simultaneous logins. Any subsequent
logins will discontinue any prior instances of the Web UI.
4.3 Managing Users and Security
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
259
To Next Page
Loading...
Need help?
General
