Orolia SecureSync 2400 User Manual

1.
Navigate to the MANAGEMENT > OTHER: Authentication window.
2. Locate the spadmin entry in the Users table.
3.
Click the CHANGE button.
4.
In the Add or Change User window:
1.
Enter a new password.
Note: The new password can be from 8 to 32 characters in length.
2.
Confirm the new password.
3.
Click Submit.
To reset the "spadmin" account password via the serial port, or SSH:
1.
Connect a PC to the front panel USB or rear panel seial console port, and log in using
an account with admin group rights (such as the spadmin account).
2.
Type: resetpw <Enter>. The spadmin account password is now reset.
After resetting the password follow the procedure above to change the spadmin pass-
word in the MANAGEMENT > OTHER: Authentication window.
258
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
4.3 Managing Users and Security

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English