tab.
You may use your self-signed certificate (or the default Spectracom self-signed certificate
that comes with the unit) while waiting for the HTTPS certificate from the Certificate
Authority, or – if a Certificate Authority is not available – until it expires. The typical life
span of a certificate is about 10years.
NOTE: When accessing the SecureSync WebUI while using the self-signed certificate,
your Windows
®
web browser will ask you to confirm that you want to access this site via
https with only a self-signed certificate in place. Other operating systems may vary in how
they install and accept certificates. External Internet access may be required by your Cer-
tificate Authority to verify your certificate.
2.14.6.7 Uploading an X.509 PEM Certificate Text
Many Certificate Authorities simply issue a Certificate in the form of a plain text file. If your
Certificate was provided in this manner, and the Certificate is in the X.509 PEM format, fol-
low the procedure below to upload the Certificate text by copying and pasting it into the
WebUI.
Note: Only X.509 PEM Certificates can be loaded in this manner. Cer-
tificates issued in other formats must be uploaded via the Upload Cer-
tificate tab.
Certificate Chain
It is also possible to upload a X.509 PEM Certificate Chain by pasting the text of the second
certificate behind the regular CA Certificate.
Uploading X.509 PEM certificate text
To upload an X.509 PEM Certificate text to SecureSync:
1.
Navigate to MANAGEMENT > NETWORK: HTTPS Setup.
2.
Select the Upload X.509 PEM Certificate tab.
74
CHAPTER 2 • SecureSync 2400 User Manual Rev. 2
2.14 Configure Network Settings
To Next Page
Loading...
Need help?
General
