Orolia SecureSync 2400 User Manual

3.
Click OK in the grey confirmation window that displays.
4.
Save the configuration file to a directory where it will be safe.
Note: The Reference Priority configuration must be saved BEFORE begin-
ning with the hardware installation.
After completion of the hardware installation, the Reference Priority configuration needs
to be restored; see STEP [9].
5.2.2.6 [3]: Determining the Installation Procedure
The installation procedure for option cards varies, depending on:
i.
option card model
ii.
installation slot chosen by you, and
iii.
for upper slots only: if the bottom slot is used or not.
Determining the correct installation procedure
a.
Identify the last two digits of the part number of your option card (see label on bag).
b.
Inspect the back of the SecureSync housing, and select an empty slot for the new
card. If the card is to be installed in one of the upper slots (4, or 6), take note if the
342 SecureSync 2400 User Manual
APPENDIX

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English