5.
In the Upload File window, click Choose File. Using the Explorer window, navigate
to the location mentioned under the first step, select the license file, and monitor
the installation progress in the Status Upgrade window until the application has
rebooted.
6.
Refresh the browser window, and login to the Web UIagain. Re-navigate to Tools >
Upgrade/Backup, and confirm that the newly installed Option is listed in the Sys-
tem Configuration panel.
4.7 Backing-up and Restoring Configuration Files
Once SecureSync has been configured, it may be desired to back up the configuration files
to a PC for off-unit storage. If necessary in the future, the original configuration of the
SecureSync can then be restored into the same unit.
The capability to backup and restore configurations also adds the ability to “clone” multiple
SecureSync units with similar settings. Once one SecureSync unit has been configured as
desired, configurations that are not specific to each unit (such as NTP settings, log configs,
etc.) can be backed up and loaded onto another SecureSync unit for duplicate con-
figurations.
There are several configuration files that are bundled in one file for ease of handling.
Note: For security reasons, configurations relating to security of the
product, such as SSH/SSL certificates, cannot be backed up to a PC.
4.7.1 Accessing the System Configuration Screen
The System Configuration Screen provides comprehensive information about hardware
and software status. To access the System Configuration screen:
316
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
4.7 Backing-up and Restoring Configuration Files
To Next Page
Loading...
Need help?
General
