Orolia SecureSync 2400 - Network Interface Option Cards; NTP and Networking [4 A, 49]

5.2.6 Network Interface Option Cards
This section contains technical information and SecureSync Web UI procedures pertaining
to option cards designed as Ethernet network interfaces using, e.g. the PTP format.
5.2.6.1 NTP and Networking [4A, 49]
The NTP and Networking cards have interfaces that allow the user to communicate out-
side of the normal channels that the SecureSync provides.
The 4A card, for instance, provides (4) 1 Gb NTP Server Outputs that can operate inde-
pendently of the unit network.
Quad 1 Gb NTP Server [-4A]: Specifications
Inputs/Outputs: (4) Gigabit Ethernet
Connectors: SFP Ports (4x)
Management: Enabled or Disabled (NTP server only)
Maximum Number of Cards: 1
Ordering Information: 1204-4A: Quad Gigabit Ethernet
Figure 5-49: 1204-4A option card rear plate
Dual 1 Gb NTP Server [-49]: Specifications
Inputs/Outputs: (2) Gigabit Ethernet
Connectors: SFP Ports (2x)
Management: Enabled or Disabled (NTP server only)
Maximum Number of Cards: 1
Ordering Information: 1204-49: Dual Gigabit Ethernet
458 SecureSync 2400 User Manual
APPENDIX