Figure 5-50: 1204-49 option card rear plate
Networking
To configure the network information on this set of cards, navigate to MANAGEMENT >
Network Setup.
In the Actions Panel, select Configure xxxx 1GBE (Slot x).
In the xxxx 1GBE (Slot x) Network Status window, each of your Ethernet ports will be lis-
ted, along with their status.
To view the network information for each port, click on the information icon.
To edit the network information, click on the gear icon.
SecureSync 2400 User Manual 459
APPENDIX
To Next Page
Loading...
