3.
Under Enable TACACS+, click the toggle to ON to enable TACACS+, and click the
toggle to OFF to disable this feature.
4.
Click Submit.
4.3.6.2 Adding/Removing a TACACS+ Server
To add a TACACS+ authentication server, or remove a server from the list:
1.
Navigate to MANAGEMENT > OTHER: Authentication.
2.
In the Actions panel on the left, click TACACS+ Setup. The TACACS+ Setup win-
dow will be displayed:
3.
Fill out the fields:
Host: The hostname or IP address of the TACACS+ server
Port: Defines the TACACS+ Port to use.
Secret Key: The same encryption key as used on the TACACS+ server.
4.
Click the Add Server button. A confirmation message The item has been added will
be displayed if the server could be added, and the server will be added to the list.
The server status can be:
DISABLED: The TACACS+ service is disabled.
UNREACHABLE: This TACACS+ server cannot be reached.
REACHABLE: This TACACS+ server can be reached.
272
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
4.3 Managing Users and Security
To Next Page
Loading...
