Orolia SecureSync 2400 User Manual

You can also configure a notification alarm, see "Enabling/Disabling the BroadShield Ser-
vice" on page196.
BroadShield Web UIMonitoring
The BroadShield Web UI will also display real time signal status information, or a map status.
Note: If at any time you receive an error message Failed to connect to the
unit, the SecureSync Web UImay have timed out (see "Web UI Timeout"
on page259). Refresh your browser page to log back in.
To open the BroadShield user interface:
1.
Navigate to MANAGEMENT > Broadshield.
2.
The embedded Broadshield Web UI will open, displaying the Dashboard and provid-
ing access to the following panels:
DASHBOARD
The Dashboard panel displays up to 7 days of history data, and a real-time amplitude fre-
quency spectrum. The headline background color indicates the current jamming/spoofing
status: red= jamming or spoofing detected; green = no alarms at this time
Top graph
The Dashboard top graph displays the past signal level over time, divided into a Normal
and a Critical signal level (separated by a red line). A blue line in the Critical zone indicates
200
CHAPTER 3 • SecureSync 2400 User Manual Rev. 2
3.3 Managing References

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English