Orolia SecureSync 2400 User Manual

3.
Under Manual Position Set accurately enter latitude, longitude (both in decimal
degrees), and altitude (in meters [WGS84]) of your GNSS antenna, SecureSync
can use this data during the satellite tracking/adjustment process, which typically
leads to a quicker "fix". It is recommended to enter the position as accurately as pos-
sible.
Determining Your Position
To determine your GNSS position, using Google Maps™:
1. On your computer, open Google Maps.
2.
In Google Maps, locate your building, and the location of your antenna.
3.
Right-click on the location. Select What's here? At the bottom, you will see a card
with the coordinates.
4.
Take note of your decimal position (e.g., 43.083191, -77.589718).
Note: Should you prefer to determine your position in a different
way, and as a result, have your latitude & longitude data in
degrees/minutes/ seconds, you need to convert this data to the
decimal format e.g., by using a conversion tool, such as Earth Point
www.earthpoint.us , or https://www.fcc.gov/media/radio/dms-
decimal:
220
CHAPTER 3 • SecureSync 2400 User Manual Rev. 2
3.3 Managing References

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English