Orolia SecureSync 2400 User Manual

3.
In the Remote Server Setup tab, enter the IP address or host server name (e.g.,
“MyDomain.com”) you want to use as a remote log server under Log Server
Address.
4.
Fill out your desired Log Server Port.
5.
Select your Log Server Protocol [UDP, TCP].
6.
In the Log Forwarding Setup tab, click the checkbox of each type of Log File to be
used by your remote log server. You can also select the Facility and Severity of the
message.
7.
Click the Submit button.
8.
Your remote log server will appear in the Remote Log Server panel.
Changing or deleting a remote log server:
1.
Navigate to MANAGEMENT > OTHER: Log Configuration.
2.
In the Remote Log Server panel locate the remote server you wish to change or
delete.
3.
Choose the X button to delete the remote log server. Confirm by clicking OK in the
message window.
312
CHAPTER 4 • SecureSync 2400 User Manual Rev. 2
4.5 Quality Management

Orolia SecureSync 2400 Specifications

General

Brand	Orolia
Model	SecureSync 2400
Category	Recording Equipment
Language	English