Orolia SecureSync 2400 - Page 430

Coded Expression: Defines the data structure of the IRIG signal, where:
BCD = Binary Coded Decimal
TOY = Time of Year
CF = Control Field
SBS = Straight Binary Seconds
Message: The IRIG message.
IRIG Output: Edit Window
To configure the settings of one of the two IRIG Outputs, go to its Edit window. For
instructions, see: "Configuring Option Card Inputs/Outputs" on page336.
The Web UI list entries for these cards are: IRIG In/Out BNC and IRIG In/Out Fiber.
The connector numbers are: J2 and J3.
The Edit window allows the configuration of the following settings:
Signature Control: Is used to control when the IRIG modulation will be present.
This function allows the modulation to stop under certain conditions;see also "Sig-
nature Control" on page161.
Format: Used to configure the desired IRIG output formatting. The available
choices are:
IRIG A
IRIG B
414 SecureSync 2400 User Manual
APPENDIX