Page Keeper Type M28 (D3DQ-17)
SM 2-73 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
4. Remove the five screws and release the four tabs, and then remove the inner cover [A].
5. Attach the grounding plate [A] and the grounding wire [B] and then insert the grounding
wire in the notch. (Tapping Screw: 3x10)
6. Connect the long harness to the double-feed sensor (receiver) [A].
7. Attach the double-feed sensor (receiver) [A]. (Tapping screw: 3x10)
To Next Page
